Bristan Quest Easyfit Petunjuk Pemasangan & Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Petunjuk Pemasangan & Panduan Pengguna untuk Produk Pipa Bristan Quest Easyfit. Bristan Quest Easyfit 13 halaman. Kitchen sink mixer
Halaman Cetak
BRISTAN
Important Safety Information
• Please read these instructions thoroughly and retain for future use
.
• All products manufactured and supplied by Bristan are safe provided they are installed
correctly, used correctly and receive regular maintenance in accordance
with
these
instructions
.
• If you are in any doubt about your ability to install this product safely you must employ the
services of an experienced qualified plumber.
• Remove all packaging and check the components for damage before starting installation
.
•
&
Before starting any installation please consider the following
:
Prior to drilling into walls,
check that there are no hidden electrical
wires,
cables or
water
supply pipes
.
This can be
checked with the aid of an electronic
detector.
• If power tools are used do not forget to
:
- Wear eye protection
- Unplug equipment after use
• This product must not be modified in any
way
as this
will
invalidate the guarantee
.
• These fittings need to be
installed
in accordance with and meet the requirements of the Water
Supply [Water Fittings] Regulations 1999 and Scottish Byelaws 2004.
General Specifications
Operating pressure range [bar]
Min
0.3
Max
5.0
Maximum static pressure - 10 .0 bar
NOTE :-
Nominally equal [balanced] inlet supply pressures are recommended for optimum
Performance of mixer taps
.
Designed to comply with BS EN 200 for single taps/ combination taps for
water
systems of type 1
and 2 general technical specifications; and to be used
within
systems designed to BS 6700
.
BS 6 700 recommends the temperature of stored water should never exceed 65°C
.
A stored
water
temperature of 60°C is considered sufficient to meet all nominal requirements and
will
minimise
the build up of lime scale in hard
water
areas
.
03