Bristan W BASIN17 C Petunjuk Pemasangan & Daftar Isi - Halaman 3
Jelajahi secara online atau unduh pdf Petunjuk Pemasangan & Daftar Isi untuk Produk Pipa Bristan W BASIN17 C. Bristan W BASIN17 C 4 halaman. Basin clicker waste
Halaman Cetak
4. Installation
1.
Identify all components are present prior to instillation.
2.
Unscrew the backnut (4) & remove one of the rubber washers (2/3). Fit the waste
above the basin with the first washer. Locate the bottom waste.
3.
Secure waste with backnut (4) & the second washer.
4.
In order to fill the basin, the 'Clicker' mechanism of the waste needs to be
pressed down. To release the water, press the button again.
5.
Check all joints & connections for leaks.
6.
See page 3 for aftercare instructions
W BASIN04 C/G & W BASIN16 C/G (SLOTTED)
1
Waste Flange
2
Rubber Washer
3
Rubber Washer
4
Waste Body and Back Nut
1. Identify all components are present prior to installation.
2. Unscrew the clicker mechanism (1) from the flange (2) & and the flange from the
waste body (5).
3. Fit the rubber washer (4) onto the waste body (5) & put under the basin. Fit the
foam washer (3) to the flange (2) & screw through the basin into the waste body.
4. Screw the clicker mechanism (1) back into the flange (DO NOT OVERTIGHTEN)
5. Check all joints and connections for leaks
6. See page 5 for aftercare instructions
W BASIN05 C/G & W BASIN17 C/G (UNSLOTTED)
1
Clicker Mechanism
2
Flange
3
Foam Washer
4
Rubber Washer
5
Waste Body
6
Backnut