Centrometal BioSolid 34 Petunjuk Teknis

Jelajahi secara online atau unduh pdf Petunjuk Teknis untuk Ketel uap Centrometal BioSolid 34. Centrometal BioSolid 34 17 halaman. Steel hot water boilers

Halaman Cetak
Centrometal BioSolid 34 Petunjuk Teknis
IMPORTANT !
The fuel to be used is only wood under 25% humidity content (wood dried min. 1 year).
The outlet temperature always has to be over 60°C. This can be reached by obligatory connection of the
3-way thermic valve ESBE VTC 512, VTC 531 or Laddomat 21, which blocks the boiler temperature fall
under the 60°C level if the boiler is connected to the central heating system through an appropriate
number of the CAS accumulation tanks or manual 4-way mixing valve if the boiler is connected direct to
the central heating system.
NOTE:
During the process of refilling the fuel the main switch of the boiler and the button ''START/STOP''have
to be turned on.
Centrometal d.o.o. shall not be responsible for possible incorrect data caused by printing errors or error made in transcription and all figures and
diagrams are for explanatory purposes only and relevant adjustment have to be made at the spot. In any case, it reserves the right to modify its products
as deemed to be required and useful without any prior notification.
Centrometal d.o.o. Glavna 12, 40306 Macinec, Croatia
central tel: +385 40 372 600, fax: +385 40 372 611
servce tel: +385 40 372 622, fax: +385 40 372 621
www.centrometal.hr
Centrometal d.o.o. - Glavna 12, 40306 Macinec, Croatia, tel: +385 40 372 600, fax: +385 40 372 611
TECHNICAL INSTRUCTIONS
for installation, use and maintenance
of hot water boiler
and installation of additional equipment
HEATING TECHNIQUE
TUCPlus-10_1/2010-eng
HEATING TECHNIQUE
BioSolid