Bristan DOCM-T3 W Ikhtisar Instalasi - Halaman 3
Jelajahi secara online atau unduh pdf Ikhtisar Instalasi untuk Bantuan Kamar Mandi Bristan DOCM-T3 W. Bristan DOCM-T3 W 16 halaman.
Important Safety Information
•
Please read these instructions thoroughly and retain for future use.
•
All products manufactured and supplied by Bristan are safe provided they are
correctly installed, used and receive regular maintenance in accordance with these
instructions.
•
This product needs to be installed in accordance with, and meet the requirements of
the Water Supply (Water Fittings) Regulations 1999 and Scottish Byelaws 2004.
•
Remove all packaging and check the fitting for damage before starting installation.
•
Warning: Before starting any installation please consider the following: Before
drilling into walls, check that there are no hidden electrical wires, cables or water
supply pipes. This can be checked with the aid of an electronic detector.
•
If power tools are used do not forget to: - Wear eye protection
•
Important: Remember to turn off the mains water supply before connecting to any
existing pipe work. Fitting isolating valves to the inlet feeds is recommended for
ease of maintenance.
•
Warning: Before installing the new fittings it is essential that you thoroughly flush
through any new and existing pipework in order to remove any remaining swarf,
solder, etc. Failure to carry out this procedure could cause problems or damage to
the workings of the fitting.
•
Take care when handling 'flexible connecting pipes' supplied with certain taps. Do
not bend, twist or crush them. Only tighten the pipes by hand.
•
This product must not be modified in any way as this will invalidate the guarantee.
•
If you are in any doubt about your ability to install this product safely you must
employ the services of a competent person, for example, a qualified plumber with
experience in installing products of this nature.
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
- Unplug equipment after use
3