Centrometal CentroPelet ZS10 Petunjuk Teknis - Halaman 7

Jelajahi secara online atau unduh pdf Petunjuk Teknis untuk Kompor pelet Centrometal CentroPelet ZS10. Centrometal CentroPelet ZS10 12 halaman.

Halaman Cetak

Positioning

The stove is furnished with an electrical cable

to connect to a 230V 50Hz socket, preferably

with a thermal-magnetic switch. Variations in

tension of more than 10% can compromise

the stove (if not already present, an adequate

differential switch should be provided).

The electrical system must comply with the

norms; verify in particular the efficiency of

the ground circuit. The electrical feed cable

must be of a diameter adequate to the power

of the device.

The stove must be completely level. Verify the

weight bearing capacity of the flooring.

The placement of the stove within the living

environment is determined so that the

environment is heated in a uniform manner.

Before deciding where to place the stove,

keep in mind that:

• The air used for combustion must not come

from a garage or a space without ventilation

or air exchange, but from a free space or the

outside;

• The stove should not be installed in a

bedroom;

• Rather it is preferable to install the stove in a

large, central room of the house to insure the

maximum heat circulation;

• A grounded electrical connection is obligatory

(if the cable issued with the stove is not long

enough to reach the closet socket, use an

extension cable along the floor).

Fig. 6: minimum distance of objects

5/7 cm

40 cm

20 cm

40 cm

80 cm

Fire Safety Distance

The stove must be installed respecting the

following safety conditions:

• Minimum distance from the sides and the

back must be 40 cm from moderately

inflammable material;

• Easily inflammable material must not be place

closer than 80 cm in front of the stove;

• If the stove is installed on an inflammable

pavement the stove must be placed on a

slab of material that insulates it from the heat

that is wider at the sides by 20 cm and in the

front by 40 cm;

• Do not place objects in inflammable material

or any material that can compromise the

operation of the stove on the stove or within

the safety distance;

• In addition, it is advisable to keep all

elements of combustible or inflammable

material such as beams, wooden furniture,

drapes, inflammable liquids, etc. outside the

radiance area of the stove, and in any case

at least 1 m from the heating block (Fig. 6);

• In case of connection to wooden walls or

other inflammable material, it is necessary

to insulate the smoke discharge tube with

ceramic fibre or another material with the

same characteristics.

40 cm

20 cm