Green BM200 Series Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengisi Daya Baterai Green BM200 Series. Green BM200 Series 19 halaman. Battery tester charger discharge maintainer

Halaman Cetak

3.2

Select [2. Run last param], if the battery data is same as last time for BM200.

3.3

After done 3.1 or 3.2 step, screen will be following:

If the parameters are correct, users can select the four listed in the menu according to

their task requirement functions. Use <Up>, <Down> and <Enter> to select and run.

If errors are found in the preview parameters, please press <Enter> for more than 2

seconds, and the system will return to the home page to reset battery parameters.

4. Main functions

4.1 [Test]: Measure battery voltage, internal-resistance, SOC and SOH within 5 seconds

SOC, means State-of-charge of battery, range is 0 ~ 100%.

SOH, means State-of-health of battery, range0~100%.

SHENZHEN GREEN DIGITAL POWER TECH CO., LTD

Note: [Battery type], [Battery voltage], and [Battery capacity] is necessary for

setting process, the rest 5 items can be skipped if you have no special request.

Press <Up> or <Down> keys to highlight the items, press <Enter> key to

Confirm selection, then press <Up> or <Down> change data, press<Enter>

when the data is correct as you wanted. After that, press <Save>. Then

screen will enter 3.3 step.

Press <Up> or <Down> keys to highlight the items, press <Enter> key to

Confirm selection, Then screen will enter 3.3 step.

Setting Preview

Battery ：3.2V 100Ah LiFePO4

Charge ：3.65V 20.0A

Discharge ：2.6V 20.0A

Charge

Discharg

Test

Maint