Gamma 5003 Panduan Pemilik - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Mesin Merangkai Gamma 5003. Gamma 5003 20 halaman. 6 point mounting
Juga untuk Gamma 5003: Panduan Pemilik (20 halaman), Panduan Pemilik (19 halaman), Panduan Pemilik (20 halaman)

Gamma 5003 Panduan Pemilik
ASSEMBLY INSTRUCTIONS
Bellows Installation
The bellows assembly is supplied in two
pieces and should be assembled as follows.
Place the bellows section with the flange
over the upper support column with the
flange on the top. Place the remaining bel-
lows over the upper support column and
mate it with the flange on the lower bellows.
Tool Tray Installation
Lower the tool tray over the top of the upper
column support and let it rest loosely on the
bellows assembly.
Tension Track Installation
Place the tube of the tension track assembly
over the top of the upper column support.
Securely tighten the two socket set screws
on the tension track assembly tube, locking
it to the upper column support. Align the
notch in the tool tray with the tension track
bar while raising the tool tray. Secure the
tray with the set screws in the side of the
tray casting.
5