Gamma 7000 Es Panduan Pemilik - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Mesin Merangkai Gamma 7000 Es. Gamma 7000 Es 20 halaman.

ASSEMBLY INSTRUCTIONS

Stand Upper Post Installation (cont.)

With the height adjustment cap screw on the

upper post facing the right side of the

tensioner, align the four (4) holes in the upper

post flange with the holes in the tensioner

base. Secure the flange to the base with the

four cap screws and flat washers.

Height Adjustment

The turntable height of the Gamma 7000ES

is adjustable from 39" to 46". To change the

height, remove the socket head cap screw

from its current position and place it in the

appropriate hole to set the desired height of

the machine.

Installing the Turntable

Insert the center post of the turntable into the

bearings of the stringing machine base. Make

sure that the turntable brake is not engaged

before installing the turntable.