Gamma PROGRESSION 602 Panduan Pemilik - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Mesin Merangkai Gamma PROGRESSION 602. Gamma PROGRESSION 602 12 halaman.
Juga untuk Gamma PROGRESSION 602: Panduan Pemilik (16 halaman)

Halaman Cetak

STRINGING THE FRAME

Gripping the String

While holding the tension bar slightly above horizontal,

wrap the free string clockwise around the gripper drum

once and position between the gripper jaw.

Gently turn the gripper clockwise while squeezing the

jaws together until all slack in the string is removed.

Note:

Note: For proper operation, the string gripper jaw must

be in the position shown. The tension in the string

provides the clamping force to the jaws.

Pulling Tension

While securely holding the string gripper drum with your

hand, lift the tension bar above horizontal and gently

lower the bar under its own weight. If the tension bar

drops below horizontal, repeat the above action until the

bar comes to rest parallel to the racquet.

When the correct tension is attained, the drop weight bar

will rest horizontally as shown. For accurate tensioning,

it must be lowered and come to rest at horizontal without

assistance. Manually forcing the tension bar to the

horizontal position will greatly increase the string ten-

sion and may result in racquet damage.

If the tension bar comes to rest above horizontal, release

the string by lifting the bar and re-pull the string.