Centrometal EKO-CUP V3 Petunjuk Teknis - Halaman 15
Jelajahi secara online atau unduh pdf Petunjuk Teknis untuk Peralatan Industri Centrometal EKO-CUP V3. Centrometal EKO-CUP V3 20 halaman.
Halaman Cetak9.0. CONNECTION OF THE BASIC BOILER CONTR. ON EL. INSTALLATION
9.1. CONNECTION OF THE BASIC BOILER CONTROLLER -
EKO-CUP S3/V3 - REG - 90 °C ON EL. INSTALLATION
- see technical instructions delivered with the boiler controller - EKO-CUP S3/V3 - REG - 90 °C
9.2.
CONNECTION OF THE BASIC BOILER CONTROLLER -
EKO-CUP S3/V3 - REG - 100 °C ON EL. INSTALLATION
- see technical instructions delivered with the boiler controller - EKO-CUP S3/V3 - REG - 100 °C
9.3.
CONNECTION OF THE BASIC BOILER CONTROLLER -
EKO-CUP S3/V3 - REG - 105 °C ON EL. INSTALLATION
- see technical instructions delivered with the boiler controller - EKO-CUP S3/V3 - REG - 105 °C
9.4.
CONNECTION OF THE BASIC BOILER CONTROLLER -
CUPREG-Touch/90°C ON EL. INSTALLATION
- see technical instructions delivered with the boiler controller CUPREG-Touch/90°C
9.5.
CONNECTION OF THE BASIC BOILER CONTROLLER -
CUPREG-Touch/100°C ON EL. INSTALLATION
- see technical instructions delivered with the boiler controller CUPREG-Touch/100°C
9.6.
CONNECTION OF THE BASIC BOILER CONTROLLER -
CUPREG-Touch/105°C ON EL. INSTALLATION
- see technical instructions delivered with the boiler controller CUPREG-Touch/105°C
10.0. BURNER SELECTION
Burner must be suitable for the respective rated output as well as the resistance of combustion
chamber (see Technical data on page 4).
Burner selection:
FUEL
OIL
GAS
Technical instructions EKO-CUP V3
APPROPRIATE BURNER
Oil burner with fan tested and designated by EN 267
norm.
Gas burner with fan tested and designated by EN 676
norm.
Basic boiler controller
15