Decimator DMON-6S Panduan Pengoperasian - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pemutar Multimedia Portabel Decimator DMON-6S. Decimator DMON-6S 15 halaman. 3g/hd/sd-sdi multi-viewer with sdi and hdmi outputs

Halaman Cetak

Main Menus

Upon power up the unit will start in the Main Menu pointing to Input Status.

The Main Menus are:

1. Input Status

2. Control

3. Routing

4. Colours

5. UMDs

6. Audio Meters

7. Graticules

8. GPI

9. Setup

Press the < and > buttons to move left or right through the menus.

To enter into a menu press the ENTER button.

Notes:

1. Defaults are highlighted in yellow.

2. When an option is changed, a highlighted S will appear in the top right of the LCD screen and will

disappear when the options are saved after 10 seconds. Avoid powering down the unit during this

time.

3. You can always return to the Main Menu by pressing the BACK button twice.

4. As you move through the menus changing parameters, they will be instantly applied to the output

signal.

Input Status: (Has 2 states)

When pressing enter in the Input Status menu, will cycle between the status for input 1‐4 and 5‐6

(Default)

1:3G 1080p59.94

2:HD 720p50

3:SD 480i59.94

4:HD 1080i59.94

(After pressing ENTER once)

5:3G 1080p60

6:3G 1080p60

Control: (Has SUB‐MENUs)

Control

HDMI Output Type

HDMI RGB444 2C

When highlighted in the Main Menu, press the ENTER button to enter this sub‐menu.

Press the < and > buttons to move left or right respectively through the 12 menus below and press the BACK

button to go back to the Main Menu when finished.

The current value for each Sub Menu is shown in the Parameter Window.

DMON‐6S Hardware Manual for Firmware Version 1.2

Current format on SDI Input 1

Current format on SDI Input 2

Current format on SDI Input 3

Current format on SDI Input 4

Current format on SDI Input 5

Current format on SDI Input 6

Main Menu <==

Sub Menu

Parameter Window