Gamma Yealink W52P Panduan Pengguna Lengkap - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Pengguna Lengkap untuk Telepon IP Gamma Yealink W52P. Gamma Yealink W52P 20 halaman.

LED Status

The DECT repeater has one LED indicator describing the repeater operations. The following table provides

instructions on repeater operations and LED indications:

LED

Indication

Off

Red

Slowly flashes

Red

Double flashes

Red

Steady on

Red

Shortly flashes

The repeater can register to the base station in two ways:





Manual Registration

Note: The "Repeater Mode" must be enabled on the base station. In order to do that, go to Main Menu 

Settings  System Settings  Repeater Mode  Change

Auto Registration

To register a repeater automatically:



Switch on the repeater and check if the LED indicator on the repeater double flashes. If the LED

indicator does not double flash, you need to de-register the repeater first. Please refer to "De-

registration". If the LED indicator double flashes, go to next step



Switch off the repeater (disconnect the power adapter).



Set the base station in registration mode. Long press the paging key on the base station till the first

LED flashes.

Operation

Power off

Unregistered, searching for base station

Searching for base station in the registration

mode or performing registration procedure.

Registered to base station, ready for use

Attempting handset connection