Major Manufacturing FALCON MA Series Petunjuk Manual - Halaman 5
Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Kunci Major Manufacturing FALCON MA Series. Major Manufacturing FALCON MA Series 7 halaman. Template for mortise lock
Halaman CetakInstall the mortise lock positioning plate. The
plate will fit into the 1-1/4" x 8" faceplate cut
out. There will be a 3/8" diameter pin
centered on the plate. There is no top or
bottom to worry about.
Slide the HIT-66 template with the alignment
guide alignment pin and tighten to door.
Alternate tightening between the top and
bottom clamp. Do not attempt to tighten one
clamp all the way at once.
With a 3/8" twist drill,
drill the thru bolt
holes on both sides
of the door. These
holes go to the mor-
tise cavity. Do not try
to drill from one side
through to the other.
PAGE 4