Major Manufacturing HIT-136 Petunjuk Penggunaan Manual - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Penggunaan Manual untuk Kunci Major Manufacturing HIT-136. Major Manufacturing HIT-136 6 halaman. Sargent profile series cylindrical locks

Halaman Cetak

There are 3 1/4" drill bushings on both sides of the drill guide, drill these through

the door half way from both sides. They are for the escutcheon posts and wire run.

See pictures above.

Use a 5/16" drill

bit and drill the

lock post holes.

They are located

at 6 & 12 o'clock,

above and below

the lock lever.

NOTE: The

factory template

calls for a 7/16"

hole—a 5/16" will

work perfect.