Major Manufacturing HIT-40AR7 Petunjuk Manual - Halaman 5

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Kunci Major Manufacturing HIT-40AR7. Major Manufacturing HIT-40AR7 6 halaman.

DRILL ALL HOLES WITH A 5/32"

DRILL BIT. INSERTING A SECOND

5/32" BIT BACKWARDS INTO THE

FIRST HOLE DRILLED WILL LOCK

THE TEMPLATE IN POSITION.

AFTER ALL HOLES 5/32" HOLES

ARE DRILLED, REDRILL ONLY THE

TWO INDICATOR HOLES TO 7/8"

WITH A HOLE SAW. ALTERNATE

DRILLING BETWEEN BOTH PILOT

HOLES A LITTLE AT A TIME.

DRILLING ONE HOLE THROUGH AT

ONCE WILL REMOVE THE SECOND

PILOT HOLE.

ALL HOLES DRILLED INCLUDING

INDICATOR OPENING.

PAGE 5