Major Manufacturing HIT-66-240 Petunjuk Manual - Halaman 4

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Kunci Major Manufacturing HIT-66-240. Major Manufacturing HIT-66-240 7 halaman. Template for mortise lock

Halaman Cetak

NOTE: The HIT-66 clamps

shown are not part of the

HIT-66-282 template set and

must be purchased as a

separate item.

With both clamps opened equally,

install both inside and outside

templates to the HIT-66 clamp as

shown. Do not tighten the 10-32

screws at this time. When all screws

have been loosely installed, then it is

ok to tighten.

Install the alignment guide to

either side of the template

set. This is used to align the

template with the mortise

pocket.

Shown is a standard

mortise pocket, we will

use this as a basis for

the Falcon Mortise Lock

install.

PAGE 3