IKEA UPPSPEL Manual - Halaman 3
Jelajahi secara online atau unduh pdf Manual untuk Perabotan Dalam Ruangan IKEA UPPSPEL. IKEA UPPSPEL 11 halaman. Gaming desks
Juga untuk IKEA UPPSPEL: Petunjuk Manual (17 halaman), Panduan Memulai Cepat (5 halaman)
QUICK GUIDE
Follow these instructions when adjusting
table height:
1. Make sure no objects are in the way of the table.
2. In order to move the table up/down, press the
up and down arrow button respectively.
3. The display switches off when not in use for
about 10 seconds. Press any button to wake the
controller up.
Safety regulations
— When the table is moving up/down, keep the
necessary safety distance to avoid the risk of
being squeezed between the moving table top
and fixed objects in the surrounding area.
— When the table is moving up/down, the user
shall make sure that nobody is injured and that
no object is damaged. The table top must not
bump into a fixed object, causing the table to
overturn. Always remove any chair before the
table is moved up/down.
— The table tripod must not be altered or
reconstructed in any way. In service and repair
work of the table, the electrical cable must a
always be disconnected from the power source.
— Modifications to the legs are absolutely
forbidden!
— The table must not be used as a hoisting device
for persons.
Maintenance and repair instructions
— After approx. 1 week of use, check that the
screws are properly tightened.
— If the table cannot be lowered or raised, check
that all electrical connections are connected
properly.
— If any part of the electrical system is replaced,
the electrical cable must first be disconnected
from the power source. Replace the electrical
part and then connect the electrical cable to the
power source. The table is now ready for use.
If the table still does not work, please contact your
nearest IKEA store or customer service.
Manufacturer:
IKEA of Sweden AB
Address:
Box 702, SE-343 81 ÄLMHULT
SAVE THESE INSTRUCTIONS
Product servicing
Do not attempt to repair this product yourself,
since opening or removing protective covers may
expose you to dangerous voltage points or other
risks.