Major Manufacturing HIT-41 SERIES Petunjuk Manual - Halaman 7

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Dengan kunci Major Manufacturing HIT-41 SERIES. Major Manufacturing HIT-41 SERIES 12 halaman. Electric strike templates

Halaman Cetak

Adjust the router bit so it is about 1/4" past

the aluminum as shown.

Place the router at the bottom of the

template, you will be routing the lip area first,

routing clockwise starting at the bottom. Let

the router come to full speed and route

through the side of the jamb. Be sure to hold

the router flat against the template and DO

NOT BACK UP IN THE CUT. When

completed at the top, LET THE ROUTER

COME TO A COMPLETE STOP BEFORE

REMOVING IT FROM THE TEMPLATE.

Note that we did not route through the top of

the lip area, this will be cut out with the next

pass. If you run through the side wall you

run the risk of hitting the template with the

router bit.

Place the router at the top of the template,

you will be routing the faceplate area. The

router guide should be touching the electric

strike template with the bit not making con-

tact with the frame. Let the router come to full

speed and route through the side of the

jamb. Be sure to hold the router flat against

the template and DO NOT BACK UP IN THE

CUT. When completed at the top, LET THE

ROUTER COME TO A COMPLETE STOP

BEFORE REMOVING IT FROM THE

TEMPLATE