Green Brook Orion ODM202 Manual
Jelajahi secara online atau unduh pdf Manual untuk Sensor Keamanan Green Brook Orion ODM202. Green Brook Orion ODM202 2 halaman. Infra-red microwave presence detector
Halaman CetakInfra-red Microwave Presence Detector
•
Please read these instructions carefully before installation and keep safe for future
reference.
IMPORTANT
This product should be installed by a competent person and in accordance with the
current IET Wiring Regulations and Building Regulations.
If in doubt,consult a qualified electrician.
•
Always turn off the mains supply before commencing work.
With ambient light
more than the setting
value, the lamp does
not switch on when
someone enters the
room.
Switch the mains supply OFF first to prevent electric shock.
1.
Decide on mounting position of sensor in and screw into position using the two mounting
lugs at either end. (ensure there is no wiring/gas/water services directly behind the screws)
refer to Dia:1.
Dia:1
2.
Connect the mains in and load out wires according to Dia:1 and Dia:2.
'Orion Range'
- Programmed Settings
Model: ODM202
Important Safety Instructions
INSTALLATION
With ambient light less
than daylight threshold,
the lamp will be on
100% when someone
enters the room.
After the hold time, the
light switches off
automatically when no
movement is detected.