jakob HIT-TRAC 16B Panduan Pengguna - Halaman 19

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Derek jakob HIT-TRAC 16B. jakob HIT-TRAC 16B 19 halaman.

Halaman Cetak
6

Maintenance

The following items of inspection and maintenance work must be carried out:
Working
General visual inspection:
- Drive system
- Housing
- Anchor bolts, pulling tab
Control of lowering brake
Bolt check
Cleaning of drive wheel
Petrol motor: Refuel
Relubrication of the pinion
Rope:
- Visual inspection
- Compression sleeve
- Eye hook with securing device
- Diameter check
Rope: Cleaning
Oil level in sight glass
Units, rope and accessories must be checked at least every 2 years (see sticker on the unit) by
an expert certified by Jakob AG.
When doing so all parts are checked for deformation, wear and cracks. The test results must be
entered in the inspection log.
The tests must be arranged by the operating company.
In addition to this additional tests must be arranged by an expert according to the local regula-
tions as well as after harsh use conditions, at a shortened interval.
7

Spare parts

The spare parts are provided on a separate list. This can be requested from Jakob AG.
8

Disposal

Please comply with the local regulations on disposal.
Fully drain your HIT-TRAC of oil.
Please dispose of even the smallest quantities of oil properly or bring them to a responsible location.
When dismantling, separate material types as far as possible, to allow recycling: Keep metal and plastic parts separate and
send for recycling.
Please bear in mind that protecting the environment and re-use of materials benefits everybody.
jakob.com ∙ [email protected]
∙ Copyright by Jakob AG Switzerland
At the start of
As required
work
X
X
X
X
X
X
X
X
X
X
X
X
X
Comments
Holding function
after first use or overhaul
see STIHL operating instructions
Gear wheel grease
According to ISO 4309
Inspection for deformations,
damage, cracks
or wire breaks
Max 10% smaller than rated diameter
19 / 19