Green Brook KingShield TXPIR120W Petunjuk Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Lampu Banjir Green Brook KingShield TXPIR120W. Green Brook KingShield TXPIR120W 2 halaman. Xenon floodlights with pir

Halaman Cetak

Daylight Control

The daylight control adjusts the level of

daylight the infrared detector becomes

activated at, so that it can detect. Turn

the control clockwise to decrease the

lighting value so the light will come on

later in the evening. Turn the control

anti-clockwise to increase the lighting

value so the light will come on earlier in

the evening.

TESTING

By setting the time and daylight control

to fully anti-clockwise a daylight walk-by

test can be performed to check operation

in daylight after the initial installation.

Field of Detection

The field of detection of the infrared

lamp can be adjusted 30

horizontally.

The horizontal

120

detection

range can be

reduced or

expanded, see

Fig. 4 & 5, to

reduce any false

detections caused

by movements

from neighbour-

ing

grounds.

The best detec-

tion

is obtained by

approaching

the field of

detection

perpendicular

to its axis. See

Fig.6. If the field

of detection is

approached

in the direction

of its axis, the

infrared detector

will, in some

cases, respond

later. See Fig.7.

TROUBLE SHOOTING

• On installation please do not fix the

lamp under a roof or under trees, as

the lamp can light up during daylight

hours.

• If your lamp suddenly stops working,

the bulb or fuse could be defective or

there may have been a failure in the

vertically and

Fig. 4

Fig. 5

Fig. 6

Fig. 7

electrical circuit. Please contact a

qualified electrician.

• Your lamp may not work satisfactorily

if it is placed in such a way that the

field of detection is not walked

through. Please ensure the detection

area is tested every now and again.

• If the temperature difference between

the object to be detected and the

surrounding area is too small (in the

summer for example) then your lamp

will react later. The range of detection

is then 10 metres instead of the

normal 12 metres for example.

TECHNICAL INFORMATION

Power Source:

Max Lighting Load:

Dectection Angle:

Detection Range:-

Time Delay:

Light Sensivity:-

Power Cord:

Glass:

Please keep these instructions

for future reference.

WEST ROAD . HARLOW

ESSEX . CM20 2BG . UK

[email protected]

WWW.GREENBROOK.CO.UK

220-240V AC, 50Hz

120W class C Xenon Tube

120 degrees (fan shaped)

12M

From 9 secs to 10 mins

(adjustable)

30 Lux (adjustable)

H05RN-F 3G 1.0mm

133 x 92 x 4mm