Green Brook OD100 Panduan Memulai Cepat

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Beralih Green Brook OD100. Green Brook OD100 2 halaman. Infra-red motion detector - wall switch

Halaman Cetak

Infra-red Motion Detector - Wall Switch

•

Please read these instructions carefully before installation and keep safe for future

reference.

IMPORTANT

This product should be installed by a competent person and in accordance with the

current IET Wiring Regulations and Building Regulations.

If in doubt,consult a qualified electrician.

•

Always turn off the mains supply before commencing work.

As the detector responds to changes in temperature, avoid the following situations:-

•

Avoid pointing the detector towards objects with highly reflective surfaces, such as

mirrors etc.

•

Avoid mounting the detector near heat sources, such as heating vents, air conditioning

units, lights etc.

•

Avoid pointing the detector towards objects that may move in the wind, such as

curtains, tall plants etc.

Switch the mains supply OFF first to prevent electric shock.

Unclip both face plates using a small

flat-blade screwdriver, refer to Dia:1.

Dia:1

'Orion Range'

Model: OD100

Important Safety Instructions

Note:

Suitable for wall mounting only.

Not suitable for parallel connections.

Model: OD100 -

Function Switch:

'ON'

'OFF'

'PIR"

FIELD OF DETECTION

INSTALLATION

= Permanently ON

= Permanently OFF

= PIR Control

Connect the Live in wire to the 'L'

terminal and Load out wire to the 'A'

terminal, refer to Dia:2.

Dia:2