Major tech MT874 Buku Petunjuk - Halaman 10

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Ukur Major tech MT874. Major tech MT874 20 halaman. 600v ac/dc trms multimeter

4. Battery Installation

WARNING: To avoid electric shock, disconnect the test leads from any source

of voltage before removing the battery cover.

1. Disconnect the test leads from the meter.

2. Open the battery cover by loosening the screw using a Flat head

screwdriver.

3. Insert the battery into battery holder, observing the correct polarity.

4. Put the battery cover back in place, secure with the screw.

WARNING: To avoid electric shock, do not operate the meter until the battery

cover is in place and fastened securely.

NOTE: If your meter does not work properly, check the fuses and batteries to

make sure that they are still good and that they are properly inserted.

The Data Hold function allows the meter to "freeze" a measurement for later

reference.

1. Press the Data Hold Button to "freeze" the reading on the indicator, the

indicator "H" will be appear in the display.

2. Press the Data Hold Button to return to normal operation.

1. Under the Diode Test/Continuity Check, press Mode/Rel Button for select

function.

2. Under Voltage/Current/Resistance measurements, pressing Mode/Rel

Button is REL function.

5-3. Auto Power Oﬀ

• The auto oﬀ feature will turn the meter oﬀ after 15 minutes.

• To disable the auto power oﬀ feature, hold down the Mode/Rel Button and

turn the meter on.

Note: The above data only for reference.