Major tech MT945 Buku Petunjuk - Halaman 5
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Ukur Major tech MT945. Major tech MT945 12 halaman. Hot wire thermo anemometer
Halaman Cetak• Press "Setup
" to turn on the backlight. Press it again to turn off the
backlight. Press "Setup
(See "Changing Setup Options.")
• Press "Unit
" to scroll to the Setup option you want to change. Press
"Unit
" to increase the displayed setting.
• Press "Unit
" to start recording and press again to stop recording. If
enter a Setup option. Scroll to the Setup option you want to change.
Press "Unit
" to decrease the Displayed setting.
• Performing a multi-point mean calculation or performing a mean
calculation in time.
• Press "Man/Mix" to step through the maximum and minimum
readings. To exit the MAN/MIX mode, press the "Man/Mix" button for
2 seconds to return to normal operation.
• To change between displaying the temperature, flow velocity, and
calculated Volumetric flow rate: Press "Flow/Temp".
3. DISPLAY ELEMENTS
1 - Low Power.
2 - Primary Display: air
velocity, recording data or
time.
3 - Air velocity units.
4 - Secondly display data.
5 - Secondly display: air flow,
temperature, or air velocity
data.
6 - Record MAX, MIN display.
7 - Sign of multi-point mean
calculation.
8 - Mean calculation
9 - Sign of mean calculation in
time.
10 - The multiple of Secondly
display data.
11 - Flow units.
12 - Temperature units.
13 - Flow area units.
14 - The multiple of Primary
display data.
" button for 3 seconds to start or exit Setup.
15 - The Sign of Auto Power Off.
16 - The sign of time.
17 - Freezing the data.
18 - Entering or Exiting Setup.
5