Green Brook GX-SL08N Panduan Petunjuk Pengoperasian/Keselamatan - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian/Keselamatan untuk Tangga Green Brook GX-SL08N. Green Brook GX-SL08N 9 halaman.

Halaman Cetak
Reasons for accidents
The following list of hazards and examples of their causes, which is not exhaustive, are common
reasons for accidents encountered when using ladders and are the basis on which the information in
this manual has been developed:
a)
Loss of stability:
1. Incorrect positioning of the ladder (such as incorrect angle for leaning ladder or not fully
opening a standing ladder);
2. slide outwards at the bottom (such as bottom of leaning ladders sliding away from the wall)
3. side slip, falling sideways and top flip (such as overreaching or fragile top contact surface);
4. falling sideways
5. condition of the ladder (such as missing anti-slip feet);
6. stepping off an unsecured ladder at height;
7. ground conditions (such as unstable soft ground, sloping ground, slippery surfaces or
contaminated solid surfaces);
8. Adverse weather conditions (such as windy conditions);
9. collision with the ladder (such as vehicle or door
10. incorrect choice of ladder (such as too short, unsuitable task).
b)
From handling:
1. Transferring the ladder to the work position;
2. erecting and dismantling the ladder;
3. carrying items up the ladder
c)
Slip trip and fall of user:
1. Inappropriate footwear;
2. contaminated rungs or Steps;
3. unsafe user practices (such as climbing 2 rungs at a time, sliding down stiles).
4. ground conditions (such as unstable soft ground, sloping ground, slippery surfaces or
contaminated solid surfaces).
d)
Structural failure of ladder:
1.
condition of the ladder (such as damaged stiles);
2.
overloading the ladder.
3.
unintended use.
e)
Electrical hazards:
1. Unavoidable live working (e. g. fault finding);
2. positioning ladders too close to live electrical equipment (such as overhead power lines);
3. ladders damaging electrical equipment (such as covers or protective insulation);
4. incorrect selection of type of ladder for electrical work.