Major tech MT245 Buku Petunjuk - Halaman 12

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Uji Major tech MT245. Major tech MT245 20 halaman. Car battery tester

3.1.3. Starting System Test

Ÿ Clamp the red and black clamps of the

tester on the tested battery, connect

the red to the positive pole and the

black to the negative pole, and the

display screen will immediately display

the start-up interface.

Ÿ The main interface appears 2 seconds

after start-up. Press the UP/DOWN key

to select the battery level, then please

select 'In vehicle', and then press

ENTER to confirm.

Ÿ Press the UP/DOWN keys to select

'starting system test', and then press

the "ENTER" key to confirm.

1. The climb test is normal, and the test result example 1 is displayed.

Climb test

Time: 6810ms

Maximum: 11.55V

Minimum: 10.24V

The starting voltage is normal

2. When the climb test is abnormal, the test result example 2 is displayed.

Climb test

Time: 15020ms

Maximum: 9.05V

Minimum: 8.55V

Low starting voltage

Note: Prepare before the test. If the car is starting, please turn off the

engine and turn the key to the "OFF" position. Before starting the system

test, it is necessary to test whether the "CCA" of the battery is normal. If

the function of the battery itself is abnormal, the test data of the starting

system will be abnormal. After the test, do not shut down the engine, press

EXIT to enter the next charging system test.

10 12