Major tech MT933 Buku Petunjuk - Halaman 7
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Uji Major tech MT933. Major tech MT933 16 halaman. Cable length tester
Halaman Cetak
5.3. MEM Button
• The MEM Button is used for the user-selected programming function.
• Refer to "Operation" for a complete description of the programming
process.
• Press and hold the MEM Button to cancel the auto-shutdown function.
5.4. CAL Button
• The meter must be calibrated each time it is turned ON.
• Refer to "Operation" for a complete description of the calibration
process.
• Used to enter/exit sample wire length setting mode.
5.5. FT/M Button
• Press momentarily to select length measurement units.
• On the LCD, "ff indicates feet and "m" indicates meters.
5.6. Cu/AI Button
• Press the Cu/Al Button to select copper or aluminum wire
measurement.
• Press and hold the Cu/Al Button to select °C/°F.
5.7. Up/Down Button
• Used during the user-selected programming process.
• Refer to "Operation" for a complete description of the programming
process.
7