jali Cupboard - Multi Manual Petunjuk Perakitan - Halaman 5

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Perabotan Dalam Ruangan jali Cupboard - Multi. jali Cupboard - Multi 10 halaman.
Juga untuk jali Cupboard - Multi: Manual Petunjuk Perakitan (11 halaman)

Halaman Cetak

BOX ASSEMBLY

7. Align the Valance White Cams with the Box

Base Cam Bolts, then lock each cam securely in

place. See Page 2 for help with cams.

8. Now we'll assemble the main box. The best

order to follow depends on how many Dividers and

Shelves are within the box, so read this section

before you start. Lay the parts out on the floor as

shown in the following illustrations. Ensure that the

front edges of all parts are towards the floor, and

that all joins appear to align properly.

If you have no Dividers, skip ahead to Step 9.

If you have more than one Divider, start by placing all the necessary shelves between the Dividers,

as we won't be able to access this space later once the Dividers are fixed in place. Wherever (if)

the Divider features a central Cam Bolt, place one of the Shelves with cams. After locating the other

normal Shelves, lock these Shelf cams into place to hold the structure together. Now continue with

the next paragraph.

Pilot hole, then fix

with 45mm CSK Screw

Box Top

Front edge to the floor,

engraved label facing away

Front edge to the floor,

engraved label facing towards

Assembly Instructions: Single Section Cupboard

Divider/s

Box Base

If you have just one Divider, the Box Top

and Box Base can now be attached to the

Divider. After locating them, use a 2mm Drill

to create pilot holes (through the pre existing

4mm holes), before screwing the parts together

with 45mm CSK Screws. The pilot hole is

necessary to ensure that the wood won't split.

with 45mm CSK Screws

Valance

Pilot hole, then fix

Page 5 of 10