jali Dresser Manual Petunjuk Perakitan - Halaman 5

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Perabotan Dalam Ruangan jali Dresser. jali Dresser 9 halaman.

7. Screw Cam Bolts into the underside of the Countertop, however, note that the Countertop may

have other holes; refer to the positions of Nickel Cams at the top of Sides & Dividers to find out which

holes to place Cam Bolts. Locate the Countertop with these Nickel Cams and lock them into place.

If you used the skirtings to space the Uprights off the floor, the front edge of the Countertop should be

just resting on the floor, and this will make the Cam Bolts line up with the Sides & Dividers easily.

Note that we are now viewing

from the opposite side

Countertop

Base Shelf Support

8. Beneath any Dividers, Base Shelf Supports must be attached. Fit Cam Bolts in the required 5mm

holes on the underside of the Base Shelf. Place White Cams in the Base Shelf Supports. You may

need to slacken the Uprights the Divider in order to lock the Base Shelf Support into place with the

Cam Bolts.

Attach the Adjustable Feet to the Base Shelf Support using the Foot Plate and 20mm RND Screws

for each assembly. However, you should pilot drill these first to avoid splitting the wood.

The Adjustable Foot should be set to about 25mm.

20mm RND Screw

Foot Plate

Adjustable Foot

Set to 25mm

25mm

Assembly Instructions: Dresser

Page 5 of 9