Green Digital Power-tech G100-12F Panduan Pengguna - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengisi Daya Baterai Green Digital Power-tech G100-12F. Green Digital Power-tech G100-12F 2 halaman. G100-xxl/f series 12-48v (4-16s) li-ion/polymer/lifepo4 battery charger
Halaman Cetak
Brief Introduction
G100-xxL/F family products are main member of Green Digital Power-tech
Co., Ltd. It represents today's new technology for 12~48V Li-Ion/Polymer
battery pack
charging.
G100-xxL/F
( Pre-CC-CV-Cutoff) charging process ， It is designed for
Li-Ion/Polymer/LiFePo4 battery pack. Stage "Pre" is a pre-charge function for
deep discharged battery pack, this is helpful for battery's cycle life. The
pre-charge current is less than 1/3 C.C value. When the battery recovered by
pre-charge small current, stage "CC" will give constant current charging, the
charge current up to 80W. Then, "CV" stage is followed, the output voltage is
limited on C.V value, until the charge current declined to 1/10 C.C. At this stage,
the battery is charged completely and the charger will cut off output automatic.
Further, G100-xxL/F can display the charging process, indicate the battery
capacity from 25% to 100% timely. This is helpful for user.
For more safety, G100-xxL/F will inter protection mode when the battery
polarity reversed our the output connectors shorted.
General Specification for G100-xxL/F
Input Voltage: AC 100~240V 50/60Hz
Input Current: Max. 1.6A
Output
G100-12F
G100-12L
G100-24F
C.V
14.4V
16.8V
28.8V
C.C
5.0A
4.5A
2.8A
Operating
-10℃~40℃
No fan designing, natural convection. Do not cover the charger.
Cooling
Charge
Auto 3 stages: pre-charge, then C.C. mode, then C.V mode, then OFF
12V~48V 4-40AH Li-ion/Polymer/LiFePO4 Battery-pack.
Battery
Size
170X71X41mm
Enclosure
ABS+PC Plastic housing, inlet type C8 or C14
Weight
400g
programmed
three
auto
stages
4~40Ah
G100-24L
G100-36L
G100-36F
G100-48F
29.4V
42.0V
43.2V
54.0V
2.8A
2.0A
2.0A
1.6A
Cut-off when
Display Panel
Power on
(When
AC
input OK)
Charging process indicator:
Indicate battery capacity from 25% to 100% when
charging.
All lamps flashing means battery polarity reversed or
output shorted.
All lamps are "off" means no battery.
How to use:
Connect the AC cord to the socket, The "power" lamp will light on solid.
1.
Connect positive charger clip (red) to positive battery terminal, the black clip
2.
to negative. (You can use other dc plugs to connect battery), the
"25%~100%" lamps will light on flowing. If the battery polarity reversed or
output shorted, "Warning" lamp will flashing, please check the setup.
G100-48L
Depend on the charged capacity, 25%~100% lamps will lights up solid
3.
sequence, until the battery is fully charged. Then you can power off the
54.6V
charger and disconnect the battery or you can charge a new battery if you
1.6A
need.
An example shows the duration of 80% state charged for an empty battery.
Battery capacity
4.0Ah
7.0Ah
12Ah
25Ah
G100-24L
2 hours
3 hours
5 hours
10 hours