ENGLISH
Problem
The display shows an error
code.
There is water inside the
oven.
The steam cooking does not
operate.
It takes more than three mi-
nutes to empty the water
tank or the water leaks from
the steam inlet opening.
It takes too long to cook the
dishes or they cook too
quickly.
Steam and condensation
collect on the food and in
the oven.
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Technical data
Dimensions (internal)
Usable volumes
Area of baking tray
Possible cause
There is an electronic fault.
There is too much water in
the tank.
Lime obstructs the hole.
There are lime deposits in
the appliance.
The temperature is too low
or too high.
You left the dish in the oven
for too long.
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity. Do
not remove the rating plate from the appli-
ance cavity.
Width
Height
Depth
71 l
1438 cm²
Remedy
1. Deactivate the appli-
ance with the house
fuse or the safety switch
in the fuse box and acti-
vate it again.
2. If the display shows the
error code again, con-
tact the service centre.
Deactivate the appliance
and remove the water with
a cloth or sponge.
Check the steam inlet open-
ing. Remove the lime.
Check the water tank. Refer
to "Cleaning the water
tank".
Adjust the temperature if
necessary. Follow the advice
in the user manual.
Do not keep the dishes in
the oven for longer than 15
- 20 minutes after the cook-
ing ends.
.........................................
.........................................
.........................................
480
355
417
20
Halaman Cetak