Jam HX-HP400 Panduan Pengguna dan Informasi Garansi - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengguna dan Informasi Garansi untuk Headphone Jam HX-HP400. Jam HX-HP400 3 halaman.
Juga untuk Jam HX-HP400: Panduan Memulai Cepat (10 halaman)
Halaman Cetak
BLUETOOTH
CONNECTION, CONTINUED
®
The device and Bluetooth will find each other every time, as long as
the headphones are set to Bluetooth and your device's Bluetooth is,
you know, on.
If you're connecting to a computer, you may have some extra steps
on that end. You'll have to get that information from the computer
company.
Depending on your device, you may be prompted to enter a pairing
code. If prompted, enter "0000" as the code.
Note: If you turn on your Transit Lite Headphones but haven't started
the party yet, they will automatically power off after 2 minutes of
unpaired inactivity.
HOOKING UP OLD-SCHOOL AUDIO, JACK
1. Plug one end of the cord into the headphones
and the other into the headphone jack on
your device.
2. Turn on the headphones.
3. Hit PLAY on your device and crank it up — or
down if you're lame.
You'll have to play and pause the music from
your device, not your headphones. No problem.
You're there anyway, right?
Note: If you want to return to Bluetooth mode,
you will have to remove the aux cord and turn
the headphones on again.
LOOK MA, NO HANDS!
When friends call to interrupt your party of one — and you know they will — answer the phone without disconnecting from your JAM
Transit Lite Headphones. Yes, that's right. Your headphones have hands-free calling, too. How amazing is that? Here's how it works:
1. Make sure your phone and headphones are connected through Bluetooth.
2. Answering and ending a call works the same way: simply click the PLAY/PAUSE button on your Transit Lite.
3. If you'd rather not talk, hold down the PLAY/PAUSE button on your Transit Lite for 1.5 seconds to ignore the call.
THE COOLEST PART: The Transit Lite knows when a call is coming in and pauses the music before ringing. When you hang up, the
music starts where it left off—and so does the party. If it's you making the call, just start dialing from your phone, and the Transit Lite
automatically does its hands-free thing. Isn't it refreshing to know your headphones totally get you?
Check out the chart below for a complete guide on handling calls with your Transit Lite.
Situation
1
Incoming call
st
On call
2
Incoming call
nd
Both calls active
1 YEAR LIMITED WARRANTY
For detailed warranty instructions and information visit:
USA:
www.jamaudio.com/customer-support/warranty-1yr
CAN:
canada.jamaudio.com/warranty-1yr
Short Press Play/Pause Button
Pick up call
End call
Call 1 on hold, pick up call 2
Hang up call 1, switch to call 2
To obtain warranty service on your JAM product, contact a
Consumer Relations representative by telephone or email for
assistance (you can find their contact info on page 1). Please
make sure to have the model number of the product available.
COMING CLEAN
A soft, dry towel is all you need to
clean off your headphones. Using
water, harsh cleaners, or anything else
only starts messing with the mechanics
inside. So, yeah, don't do it.
Long Press Play/Pause Button
Reject call
Move call from headphones to device
Reject call 2
Switch between call 1 and call 2
2m