Bermuda 1000 Buku Petunjuk - Halaman 2

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pompa Air Bermuda 1000. Bermuda 1000 8 halaman. Fountain pumps
Juga untuk Bermuda 1000: Buku Petunjuk (8 halaman)

Halaman Cetak

Thank you for purchasing a Bermuda outdoor Feature Pump. Feature Pump

is specifically designed to power a variety of self-contained water features

and connects quickly and simply to flexible pipes and hoses. Each pump

includes flow control on the pump body, to enable water feature adjustment,

making the flow of water just right. To ensure that this product is safely and

correctly used and at its optimal performance, please read this instruction

booklet carefully before use.

Attention

1. Keep out of the reach of children.

2. A drip loop should be installed in the cable, to ensure that water cannot

travel down it and into an electrical socket.

3. An RCD (of which the rated working current is not over 30mA) must be

installed when using the pump, and the power socket must be connected

to an earth.

4. Bermuda Feature Pumps are designed for under water use only. Running

the pump dry, without water inside the pump, is strictly prohibited. Dry

running may also cause irreparable damage, and invalidate any warranty.

5. The device must not be used to pump any flammable liquids or water with

a temperature higher than 35⁰C.

6. Always disconnect the power supply when handling, servicing or

maintaining the pump.

7. Do not attempt to unplug the pump or disconnect from the power supply

with wet hands.

8. Do not carry or retrieve the pump from the water feature by pulling the

electrical cable.

9. The power cable cannot be replaced. If the power cable becomes damaged

near to the pump body it cannot be replaced, and electricals are sealed

inside the unit to make them waterproof.

Feature Pumps - Instruction Manual - FP Pumps 2021.indd 2

28/09/2020 14:32:20