MAJORITY OAK-CDAB-WAL Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Radio MAJORITY OAK-CDAB-WAL. MAJORITY OAK-CDAB-WAL 18 halaman. Dab/fm radio

Halaman Cetak

Instructions Guide

DAB / DAB+ Radio

Press the 'Mode' button (Ref.9) multiple times on the

unit to switch to DAB Radio. On first use it will

automatically scan all stations and save them.

To select the mode from the remote press the 'FM/DAB'

button (Ref.16).

Fully extend the antenna (Ref.20).

To auto scan, press the 'Menu' button (Ref.7) on the re-

mote and use the 'Next' (Ref.22) and 'Previous' buttons

(Ref.9) to scroll through options. Select "Full Scan" and

press the 'Enter' button (Ref.21). This will start scanning

up the frequency band and store all stations that have

a good signal.

The radio will automatically save all the stations with a

strong signal, up to 240 MHz. After searching has

finished it will automatically play the first station

stored.

To listen to all stations that have been stored use the

'Next' (Ref.22) and 'Previous' buttons (Ref.9) to scroll

through them, press the 'Enter' button (Ref.21) when

on required station.

The radio will display station information when you

press the 'Info' button (Ref.13) on the remote. Press it

multiple times to view all information. Please see page

19 for further details.

When you turn on the radio again after it switching off,

it will automatically tune to the same station (DAB or

FM) that was last selected. In DAB mode, the radio will

synchronize with the time and date of the station.

Prune

To remove stations that are listed but are unavailable.

Press the 'Menu' button (Ref.7) on the remote and

use the 'Next' (Ref.22) and 'Previous' buttons (Ref.9)

to scroll through options. Select "Prune" and press the

'Enter' button (Ref.21).

Use the 'Next' (Ref.22) and 'Previous' (Ref.9) buttons to

choose "Yes/No". Press the 'Enter' button (Ref.21) to

confirm. The unavailable station will now be deleted if

you chose "Yes".

Dynamic Range Compression (DRC)

This function enables you to reduce the difference

between the maximum and minimum audio volume

being broadcast. This makes quiet sounds

comparatively louder, and loud sounds comparatively

quieter. DRC only works if it enabled by the broadcaster

for a specific station.

Press the 'Menu' button (Ref.9) on the remote and use

the 'Next' (Ref.22) and 'Previous' buttons (Ref.9) to

scroll through options.

Select "DRC" and press the 'Enter' button (Ref.21).

Use the 'Next' (Ref.22) and 'Previous' (Ref.9) buttons to

select "DRC [off/high/low]".

Once you have chosen press the 'Enter' button (Ref.21)

to confirm.