MAJORITY PETERSFIELD GO 2 Panduan Pemilik - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Radio MAJORITY PETERSFIELD GO 2. MAJORITY PETERSFIELD GO 2 9 halaman. Portable digital dab+/fm radio

Halaman Cetak

2. If the PETERSFIELD GO 2 is in DAB Mode, press the MODE button repeatedly until FM is shown on the

display.

3. Once in FM Mode, PETERSFIELD GO 2 will tune to the start of the

available FM range (87.50MHz) or the last FM station (See Fig.1).

4. To manually change the FM frequency, make sure that you have not

selected any other sub-menus. Turn the TUNE+/TUNE- to change the

frequency by 0.05MHz.

Changing the DAB Display Information

If the PETERSFIELD GO 2 is in DAB Mode, press MENU/INFO button to select different info to show on

the display, such as DLS (Dynamic Label Segment), Signal Strength, PTY (Programme Type), Ensemble,

Frequency, Signal Quality, BitRate Codec, Time or Date.

If the PETERSFIELD GO 2 is in FM mode, press MENU/INFO button to select different information to show

on the display, such as Radio Text, PTY (Programme Type), PS (Programme Service), Stereo/Mono, Time,

or Date.

DAB Mode – Choosing Menu Options

If the PETERSFIELD GO 2 is in DAB Mode, press and hold MENU/INFO to enter the menu list shown on

fig.4. Press NEXT/PREVIOUS to select option through the menu list. Select your preferred option and push

the SELECT button to confirm. The menu options are: Full Scan, Manual Tune, DRC, Prune and System.

Full Scan – In the menu list, press the Next/ Previous button to select "Full

scan". Push SELECT to confirm, and the full scan starts automatically

(Seefig.2). Once a scan is completed the radio returns to play the previously

selected station or first station on the station list.

Note: If no radio station found, it shows "No DAB Station". For a better

reception, extend the antenna or do the full scan again in another place.

Manual Tune – As well as the normal method of scanning, you can also manually tune to a particular

channel/frequency. This can be useful for adjusting your antenna to achieve

the best possible reception and scanning a particular channel to update the

station list. Under the menu list, press the Next/ Previous button to select

"Manual tune". Push SELECT to confirm and then press NEXT/PREVIOUS

to select a particular channel/frequency. Push SELECT to confirm the

setting (SeeFig.3). The display shows a live indication of the received signal

strength on the selected frequency. Adjustments to your antenna will be

manifested in the received signal strength displayed.

DRC (Dynamic Range Compression)

between the loudest and quietest audio being broadcast. Effectively, this

makes quiet sounds comparatively louder and loud sounds comparatively

quieter. In the menu list, press the NEXT/PREVIOUS to select "DRC" (See

Fig. 4). Push ENTER to confirm. Press NEXT/PREVIOUS to select and

Push SELECT button to confirm the setting (Options: Off

(default)/High/Low.

Note: DRC only works if it is enabled by the broadcaster for a specific

station.

– This removes all invalid stations indicated in the station list with a

Prune

'?' in front of the station name. In the menu list, press NEXT/PREVIOUS to

select "Prune". Push SELECT to confirm (See Fig. 5). Press

NEXT/PREVIOUS to select <Yes>, and push SELECT to confirm.

Time – if there is any DAB+ radio signal, the machine will

automatically update the time, there is no signal, can also be set manually

(SeeFig.6).

*Set Time/Date: Set Hour / Set Minute / Set Month / Set Date> Set

– This function reduces the difference