MAJORITY TETON Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Pembicara MAJORITY TETON. MAJORITY TETON 20 halaman.

OPTICAL INPUT

USING THE OPTICAL INPUT

You will need: An audio source with an Optical Audio Output and a Digital Optical Audio

cable (included).

Connect the Digital Optical Audio cable to the optical output on the audio source and

to the Optical Input on the soundbar (Ref.12).

Press the POWER button on the side panel (Ref.4) or on the remote control (Ref.14) to

switch on the unit.

Press the INPUT button on the remote control repeatedly (Ref.24) to switch to Optical

mode or press the INPUT button (Ref.5) repeatedly on the soundbar to select Optical

mode. The mode indicator LED will turn yellow.

Using the native controls on your connected device, make sure the audio settings are

set to PCM or Optical Audio and are switched on.

Audio from the connected audio source will now be played through the speakers.

Optical cable

Rear view of unit