Gamut CD 3 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemutar CD Gamut CD 3. Gamut CD 3 16 halaman. High performance cd player

Connecting to other equipment

The GamuT CD 3 features three types of outputs:

•

Balanced Left and right analog output

•

Unbalanced Left and right anlog output

•

Coaxial S-PDIF output

Ground

Positive

Negative

Some other brands have Pin # 2 and 3 reversed.

They will work together with your CD 3, but the absolute phase will be reversed. You can solve this by

reversing the wires in the male plug of your balanced interconnects.

The coaxial digital output has a little switch attached to it, which makes it possible to terminate

the output with a load 75 ohm when not in use. Simply push the lever up when it is not connected

and down towards "open" when you wish to connect the CD 3 to a separate D/A converter or digital

recorder.

The 75 ohm termination will ensure optimal load of the digital output circuit when not in use. It will

improve the quality of the internal digital signal that gets converted in the internal D/A converter.

Please refeer to the section "technical quality" for output level and impedances.

If you like all the outputs has its own circuitry and buffers, which enables the possibility of using all

the outputs at the same time. So If you need to connect the CD player with f.ex. two ampliﬁ ers in

two different room or setups, you can use the balanced for one and the unbalanced the second.