IKEA GENOMKYLD Petunjuk Manual - Halaman 11

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Kulkas IKEA GENOMKYLD. IKEA GENOMKYLD 20 halaman. French door

Halaman Cetak

Fast-cooling mode

Entry: push the key 3, the icon 8 turns

on. Choose the quick cooling mode to

operate the refrigerator. If the refrigerator

is operating in the energy saving mode, the

energy saving mode exits.

Exit:

enter the energy saving mode

push the key 2 or 4 to the set temperature

push the key 3. When each condition

mentioned above occurs, the refrigeratory

exits the quick cooling mode.

Fast-freezing mode

Entry: push and hold the key 3 for 3

seconds, the icon 9 turns on. Choose the

quick-freeze mode to operate the freezer. If

the freezer is operating in the energy-saving

mode, the energy-saving mode exits. Exit:

enter the energy-saving mode

key 2 or 4

push and hold the key 3 for 3

seconds. When each condition mentioned

above occurs, the quick-freeze mode exits.

To set the temperature of the

refrigerator compartment

Push the key 1until the display changes to

refrigerator temperature setting. The icon

124 turns on. Push the key 2 or 4 once, and

the refrigerator setting temperature changes

1°C according to the regulation of "(8)- (2)

-(8)".

To set the temperature of the freezer

compartment

Push the key 1 until the display changes to

the freezer temperature setting. The icon

turns on. Push the key 2 or 4 once, and the

freezer setting temperature changes 1°C

according to the regulation of "(-15)- (-24)-

(-15)".

Backlight action

When the refrigerator/ freezer door is open

or any button is pressed,the Function Display

Screen will become illuminated.If no button

is pressed and the refrigerator/freezer door

has remained open for 30 seconds,the

Function Display will turn off.

FIRST USE

Cleaning the interior

Before using the appliance for the fi rst time,

wash the interior and all internal accessories

with lukewarm water and same neutral soap

so as to remove the typical smell of a brand-

new product, then dry thoroughly.

Connecting Your refrigerator to the

power supply

Your refrigerator will enter the ex-factory

default state after connecting to the power

supply and it will display target temperature

for the refrigerator compartment and freezer

compartment.

Work modes of Your refrigerator

push the

You can set your refrigerator in either of the

following two ways:

Auto mode

We suggest you choosing this mode if

you have no special requirements. Your

refrigerator will work automatically after you

chose this mode.

Manual mode

You can set the temperature by pressing

the temperature adjustment key. Please see

previous chapter.

Important! Do not use detergents or

abrasive powders, as these will damage the

finish.

You ought to get a good knowledge of all

safety precautions and make sure that your

refrigerator has been placed properly in its

final position before using.

Refrigerator compartment

Though the temperature-adjustable

device could keep most of the refrigerator

compartment at an average temperature

around 2~8°C, it fails to preserve the

freshness of food for long. As a result, the

refrigerator compartment can be used only

for shortterm storage.