Green Force Diamond 600-18650 Panduan Pengguna - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Senter Green Force Diamond 600-18650. Green Force Diamond 600-18650 17 halaman. Modular lighting systems
Halaman Cetak- 1. Table of Contents
- 2. PWM Technology
- 3. Green Force Hybrid & TOS
- 4. Temperature Protection
- 5. End of Battery Life
- 6. Maintenance of Your Dive Light
- 7. Flexi Battery Packs
- 8. Hybrid Battery Packs
- 9. Using Your Green Force Dive Light
- 10. Controlling the Power
- 11. Green Force Dynamic Power Management
- 12. Green Force Dynamic Beam
- 13. Diamond Backup Light
- 14. Depth Rating & Warranty
The Green Force Hybrid battery packs (except for the Hybrid 2) can be fitted with
rechargeable AA size NiMH batteries or with AA size Alkaline batteries. The Hybrid
8 can also be fitted with a Green Force NiMH rechargeable pack (10 cells) which
delivers even more power (2.2Ah).
Putting batteries in a Hybrid 2 battery pack:
Open the battery pack by removing (unscrewing) the light head. Insert the 18650
battery cells.
Please mind the polarity.
head. The positive pole of the battery has to make contact with the light head.
Screw the light head back in place (make sure the o rings are clean and slightly
greased) using little force. Applying too much force you will damage the thread.
Putting batteries in a Hybrid 8 or Hybrid 12 battery pack:
Open the battery pack by unscrewing the bottom part (counterclockwise). Insert
8 AA Alkaline or NiMH battery cells in the battery holder.
rity.
Reversed polarity will damage the light head. Mind the markings engraved
in the battery holder. Slide the battery holder (contact plate first) into the battery
pack so that the contact plate makes contact with the light head. Put (screw)
the bottom lid back in place (make sure the o ring is clean and slightly greased).
Hybrid
Reversed polarity will damage the light
Please mind the pola-
Battery Packs
Charging your Hybrid battery pack:
•
Do not charge batteries when the ambient temperature is over 40° Celsius.
•
Do not charge batteries into direct sunlight.
•
Only use the charger indoors and do not expose it to humidity.
•
Never cover the charger while charging.
•
Every battery is subject to self-discharge and will suffer deep discharged
when not charged regularly (every 6 months).
•
You can recharge the NiMH battery pack from any charge state. It is not
advised to discharge the battery completely before each charge.
Charging batteries of a Hybrid 2 battery pack:
Charge the batteries before first use!
battery pack and remove the battery cells. Connect the charger to the mains
(AC 100V to 240V, 50/60Hz) or the DC 12V-24V cigarette lighter plug (op-
tional) and insert the batteries in the slots.
polarity may damage the batteries and/or the charger.
There are two kinds of 18650 batteries available, Li-Ion (3.7V) and LiFePO4
(3.2V). You cannot mix these batteries as the chargers are different. It is not
7
Remove (unscrew) the light head from the
Please mind the pola rity.
Reversed