Gandy 24H13 Manual Suku Cadang dan Perakitan - Halaman 13
Jelajahi secara online atau unduh pdf Manual Suku Cadang dan Perakitan untuk Penyebar Gandy 24H13. Gandy 24H13 19 halaman. 24-inch variable rate spreader
Juga untuk Gandy 24H13: Panduan Operator (8 halaman), Panduan Operator (8 halaman), Panduan Operator (10 halaman)
Halaman Cetak
Step #11
(Parking Stand Assembly)
1.
Locate the following parts: front parking stand (28362-4), back parking stand (28362-6), TWO 1/4 x 5/8
carriage bolts (C04-0250-020) and TWO 1/4" flange nuts (C01-0250-030) as shown in Diagram #23.
2.
Fasten parking stands together using two carriage bolts and flange nuts as shown in Diagram #23.
Do not tighten, leave loose.
Diagram #23
Step #12
(Parking Stand to Mount Tube Assembly)
1.
Locate TWO 1/4 x 1-1/4 hex bolts (C03-0250-051), TWO 1/4" washers (C02-0250-020) and TWO 1/4" flange
nuts (C01-0250-030).
2.
Attach the long end of the parking stand to the top 1/4" hole in the mount tube using a 1/4 x 1-1/4 hex
bolt, 1/4" washer and 1/4" flange nut as shown in Diagram #24. Do not tighten.
3.
Attach the other end of the parking stand to the bottom 1/4" hole in the mount tube using the same
hardware as shown in Diagram #24. Do not tighten.
4.
Securely tighten the two carriage bolts from last step first and then then securely tighten the two bolts
from this step.
Diagram #24
Page 13 of 19
2836-A7
2824-A4