decoflame Athlantic Twin Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perapian Dalam Ruangan decoflame Athlantic Twin. decoflame Athlantic Twin 17 halaman. Wall-mounted decoflame bioethanol fireplace

Halaman Cetak

1. Operating Instructions

decoflame

INSTALLATION GUIDE

ATLANTIC TWIN

Before you start installation of your fireplace,

please check that the packaging is intact and

that all parts as listed below are included.

Contents of the boxes:

1. Screw-on caps for steel studs (6)

2. Glass screen, 6mm hardened glass (1)

3. Rubber O-rings (6)

4. Brushed stainless steel studs (6)

5. Burner situated in safety chamber, and

slider lid (2 each)

6. Back plate (black aluminium) (1)

7. Mounting bracket (1)

8. Bolt screws with washers (4 each)

9. Distance pieces (3)

10. User Manual (1)

11. Handle for Slider (2)

New York Series User Manual – Version 3.0 – January 2013

Installation of Atlantic Twin

- Best done by two people -

1. For each countersunk hole in the

mounting bracket first mark perfectly in

level and thereafter drill five holes into

the wall. Use for the type of wall suitable

metal rawlplugs/butterfly screws/expan-

sion bolts to fit the bracket.

2. Use the screws and washers to fix the

safety chambers onto the back plate.

Take three of the stainless steel studs and

fix them through the bottom holes of the

back plate with the three distance pieces.

Use the remaining three stainless steel

studs to fix the back plate to the

mounting bracket by screwing them

through the top holes in the back plate

into the holes in the mounting bracket.

Do not force those studs into the

threaded holes!

3. Place the burners inside the safety

chamber and their slider lids on top of

them - the little studs facing to the right.

Slide rubber O-rings onto the six stainless

steel studs, place the glass screen onto

the studs resting it on the O-rings and fix

with the screw-on caps. Should you find

that a hole in the glass screen seems out

of place, unscrew the relevant stud

slightly which will help fitting the glass

screen.