Airflow 90001254 Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Pengontrol Airflow 90001254. Airflow 90001254 9 halaman. Multiplexbox touchscreen controller

Halaman Cetak
Copy time programme
Select the weekday to be copied as a template. Confirm your selection and then select the target weekday
and confirm this selection again. If necessary, repeat this step for the other weekdays.
1.9.4 Settings
The following options can be selected under the menu item "Settings":
•
Date / Time
•
Duration of Ventilation stage 3
•
Sensor sensitivity
•
Versions (software version)
•
Language
Date/Time
Setting for current time and date. The summer/winter time is automatically adjusted.
Duration Ventilation stage 3
The set duration of the ventilation stage can be specified between 5 and 240 minutes in this menu item. If
ventilation stage 3 is selected in "Manual operation" mode, the ventilation unit will switch back to ventilation
stage 2 after the specified period.
Sensor Sensitivity in automatic operation
The detailed settings for sensor sensitivity on automatic operation (low/medium/high).
Parameters
Sensor
Humidity sensor [% r.F.]
Air quality sensor [ppm]
Versions (software version)
The current software version of the controller is shown.
Language
The available menu languages are English and German.
1.9.5 Firmware Update
Download the MultiPlexBox configuration and commissioning software. After installation, start the
programme "MultiPlex update". Connect the controller to your PC/Laptop using a Mini USB to USB A cable
(not included in delivery).
Click on the 'Establish connection' button. The main update tool window will open. Now click on 'Select file',
select the controller firmware in the window that opens and then 'Open'.
Click on 'Start', the firmware update will then be performed, and the progress will be displayed in a status
bar. After a successful update, the "update complete" message will appear in the top right of the display
window. You can then disconnect the controller from the USB cable and close the programme. Your
controller firmware will now be up to date.
Low
Medium
50
60
70
900
600
1200
800
1500
1000
6
High
45
40
55
50
65
60
500
700
900