Bernafon BTE UP Panduan Instalasi Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Radio Bernafon BTE UP. Bernafon BTE UP 4 halaman.

Bernafon Radio Model - Quick Installation Guide Radio Model

Name: Bernafon BTE UP

On the bottom side of the main PCB of the

Bluetooth radio is an integrated part), the programming connector, EEPROM memory and coil antenna for the 3.84 MHz radio can be seen:

The most important parts inside the Engine module are a Digital-Signal-Processor (DSP), a radio Front-End (FE) chip for the 3.84 MHz radio part and an RF

chip for the Bluetooth radio part – all mounted on a small rigid PCB again mounted on the main flex PCB. The

voltage regulators and buffered data programming inputs on board. The DSP is the main processor controlling the functionality of both radios in the

BTE UP

radio model.

Bernafon BTE UP

radio model the connector for the speaker unit assembly (where the wire antenna for the

Bernafon BTE UP Radio Model – Main PCB – Bottom side

Bernafon BTE UP

radio model also includes all

Bernafon