GANN Klima 30 Panduan Petunjuk Pengoperasian - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pencatat Data GANN Klima 30. GANN Klima 30 19 halaman.

2 Basic functions

2.1

Before commissioning the data logger, take it out of the package, remove the

screen protection film and check, whether a full CR2032 battery (3 volts) is

insert.

Display indication

After inserting the battery the device display the actual measurements for a

few seconds. Afterwards the device shows "F5" for 30 seconds. Then, the

device turns off. The same happens after pressing any button.

2.2

To configure the data logger Klima 20 / Klima 30, connect the computer with

the data logger by using the USB-cable. Start the suitable GANN software

dialog D+ and connect the data logger with the computer by using the USB

cable MK 26. The detailed description can be found in the software dialog D+

package.

Data logger Klima 20 / 30

Display indication after pressing a

button

Basic functions