Green Gorilla ProLine Em Panduan Pengguna - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyemprot Cat Green Gorilla ProLine Em. Green Gorilla ProLine Em 20 halaman. Industrial system
Halaman CetakPowerPack Usage
Turn PowerPack on by depressing the on/o power button on the top surface of the
PowerPack as shown above ( gure 32).
If fully charged, a green light will display on both the top surface and the center of the
knob. Both the knob indicator light and the power level indicator are synchronized to
indicate power depletion during normal operation. Green = Full Charged, Yellow = Half
Charge, Red = Low Battery ( gures 33 & 34).
During normal operation, the PowerPack will automatically cycle to maintain the
factory pressure set point as necessary. The Power Level Indicator Lights will remain on
to indicate the PowerPack is in pressure sensing mode.
Power Level
Indicator
IMPORTANT! After lling and pressurizing the system purge air from the wand and
wand hose by spraying product into a container until no air or air bursts are detected.
Inadequate purging of the system may initially result in uneven spray pattern or a
longer than expected ow after the wand trigger has been released.
Pg. 13
g. 33
On / O
g. 32
Power Level
Indicator
g. 34