IKEA BARMHARTIG Manual - Halaman 11

Jelajahi secara online atau unduh pdf Manual untuk Kompor IKEA BARMHARTIG. IKEA BARMHARTIG 36 halaman.
Juga untuk IKEA BARMHARTIG: Panduan Petunjuk Instalasi (20 halaman)

Halaman Cetak

ENGLISH

• you put something on the control panel.

Hints and tips

Noises during operation

When a cooking zone is active, it

may hum briefly. This is a

characteristic of all ceramic glass

cooking zones and does not

impair either the function or the

life of the appliance.

How to avoid damage to the appliance

• The glass ceramic can be damaged by

objects falling onto it, or knocked by the

cookware.

Care and cleaning

General information

Warning! Deactivate the

appliance and let it cool down

before you clean it.

Warning! For safety reasons, do

not clean the appliance with

steam blasters or high-pressure

cleaners.

Warning! Sharp objects and

abrasive cleaning agents will

damage the appliance. Clean

the appliance and remove the

residues with water and washing

up liquid after each use. Remove

also the remnants of the cleaning

agents!

If there is a problem with

electrical supply and the

appliance deactivates it does not

keep previous settings.

• Cookware made of cast iron, cast

aluminum or with damaged bottoms can

scratch the glass ceramic if slid on the

surface.

• To avoid damaging cookware and glass

ceramics, do not allow saucepans or

frying pans to boil dry.

• Do not use the cooking zones with empty

cookware or without cookware.

• Never line any part of the appliance with

aluminium foil. Never place plastic or any

other material which may melt in or on

the appliance.

Scratches or dark stains on the

glass ceramic that cannot be

removed do not affect the

functioning of the appliance.

Removing the residues and stubborn

residues

1. Food containing sugar, plastics, tin foil

residues should be removed at once,

best tool for cleaning glass surface is a

scraper (not included with the

appliance). Place a scraper on the glass

ceramic surface at an angle and remove

residues by sliding the blade over the

surface. Wipe the appliance with a

damp cloth and a little washing up

liquid. Finally, rub the appliance dry

using a clean cloth.

2. Limescale rings, water rings, fat

splashes, shiny metallic discolorations

should be removed after the appliance