KitchenAid KFGS306VSS02 Panduan Petunjuk Instalasi - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Kompor KitchenAid KFGS306VSS02. KitchenAid KFGS306VSS02 20 halaman. 30" (76.2 cm) and 36" (91.4 cm) gas built-in cooktop
Juga untuk KitchenAid KFGS306VSS02: Daftar Bagian (5 halaman)
Halaman Cetak
•
The cooktop should be installed in a location away from
strong draft areas, such as windows, doors and strong
heating vents or fans.
•
All openings in the wall or floor where cooktop is to be
installed must be sealed.
•
Cabinet opening dimensions that are shown must be used.
Given dimensions are minimum clearances.
•
Grounded electrical supply is required. See "Electrical
Requirements"
section. Proper gas supply connection must
be available. See "Gas Supply Requirements"
section.
•
The cooktop is designed to hang from the countertop by its
side flanges.
•
The gas and electric supply should be located as shown in
"Installation
Clearances" section so that they are accessible
without requiring removal of the cooktop.
•
Provide cutout in right rear corner of cutout enclosure as
shown to provide clearance for gas inlet, power supply cord,
and to allow the rating label to be visible.
IMPORTANT: To avoid damage, check with your builder or
cabinet supplier to make sure that the materials used will not
discolor, delaminate or sustain other damage.
Product
Dimensions
A. 30_6" (76.7 cm) on 30" (76.2 cm) models,
36_" (92.0 cm) on 36" (91.4 cm) models
B. 21" (53.3 cm)
C. 3 _" (8.3 cm)
Installation Clearances
A. 30" (76.2 cm) on 30" (76.2 cm) models; 36" (91.4 cm) on
36" (91.4 cm) models
B. Combustible
area above countertop
(shown by dashed box above)
C. 30" (76.2 cm) minimum clearance between top of cooktop platform
and bottom
of unprotected
wood or metal cabinet (24" [61.0 cm]
minimum clearance if bottom of wood or metal cabinet is protected
by
not less than V4" [0.6 cm] flame retardant miliboard covered with not
less than No. 28 MSG sheet steel, 0.015" [0.04 cm] stainless steel, or
0.024" [0.06 cm] aluminum or O. 0 20" [0.05 cm] copper). If installing a
range hood see NOTES. *
D. !3" (33.0 cm) recommended
upper cabinet depth
E. ! _" (2.8cm)
? 20" (50.8 cm)
G. !8" (45.7 cm) minimum clearance from upper cabinet to countertop
within minimum horizontal clearances to cooktop
H. Grounded outlet - Locate within 24" (61.0 cm) of right rear corner of
cutout
I. 29" (73.7 cm) on 30" (76.2 cm) models; 35_/#" (89.5 cm) on
36" (91.4 cm) models
J. 24" (61.0 cm) minimum countertop
depth is required
K. 2 _" (7.3 cm) minimum
distance to rear combustible
surface
L. Gas line opening - Waft: anywhere 5" (12. 7 cm) below underside of
countertop.
Cabinet floor: anywhere within 6" (15.2 cm) of rear wall is
recommended
M. 8" (20.3 cm) minimum distance to nearest left side combustible
surface.**
N. 8" (20.3 cm) minimum distance to nearest right side combustible
surface.**
30" (76.2 cm) Cooktop Overall: M + N must equal 48" (122.0 cm)
minimum + 29" (73.7 cm) cutout for cooktop or 77" (195.6 cm)
36" (9t.4 cm) Cooktop Overall: M + N must equal 48" (122.0 cm)
minimum
+ 35¼" (89.5 cm) cutout for cooktop or 83_ " (211.5 cm)
•*M + N combined
must be at least 48" (122.0 cm) minimum overall
Example 1: M = 8" (20.3 cm) left side + N = 40" (101.6 cm) right side
= 48" (122.0 cm)
Example 2: M = 24" (61.0 cm) left side + N = 24" (61.0 cm) right side
= 48" (122.0 cm)