Century Helicopter Products Hummingbird Elite 3D Pro Manual Perakitan dan Instruksi - Halaman 8
Jelajahi secara online atau unduh pdf Manual Perakitan dan Instruksi untuk Mainan Century Helicopter Products Hummingbird Elite 3D Pro. Century Helicopter Products Hummingbird Elite 3D Pro 12 halaman.
Juga untuk Century Helicopter Products Hummingbird Elite 3D Pro: Buku Petunjuk (10 halaman)
Halaman Cetak
Section 10: Combining Major Assemblies
Bags Used:
CNE313, CNE301
Combining Major Assemblies (10-1, 10-2)
42) Install the
Brass Washer
located in the
Upper Frame
opening on the flanged portion of the
Assembly.
43) Align the bolt holes in the
Lower Bracket
and attach them using the two
Century Lightning Brushless
Motor #CNE252
Pinion Gear 10-Teeth
#CNE056G
Pinion Gear 11-Teeth
#CNE056GB
Motor Mount
Spacer
#CNE301
Section 11: Rotor Head Linkage
Bags Used:
CNE307
Rotor Head Linkage (11-1, 11-2)
There are 3 different sets of links in CNE307.
2x
Short Double Links
2x
Long Adjustable Links
2x
Long Solid Links
44) Snap on the
Short Double Links
on the
Main Blade Grips
Balls
of the
Swing
Arm.
45) Snap on
Long Adjustable Links
Balls
of the
Swing Arms
the inner race of Swashplate.
46) Insert the
Long Solid Links
Stabilizer
and attach to the
Outer Seesaw Assembly
the
inner race.
Swashplate
11-2
Short Double
Link #CNE307
Outer
Control
Ball
8
from bag CNE313 onto the
Main Shaft
Assembly. Align the
Main Shaft
Bearing
in the
Lower Frame
Tail Boom Brace Bracket
with the
M2x5 Machine
10-2
M3x18 Machine
Screws #CNE301 (2)
to the
Control Balls
and to the
Inner Control
to the
Outer Control
and to the
Control Balls
on
through the
Plastic Link
Inner Control Balls
of the
and to the
Control Balls
on
Swing Arm
#CNE306
Inner
Control
Ball
Long Adjustable
Link #CNE307
10-1
with the
Rear
Screws.
Lower Frame
Autorotation
Assembly
Hub & Gear
#CNE250
43) Mount the
Machine Screws
Pinion Gear
Autorotation Hub &
If using any motor other than
other third-party motor mounting hardware may be needed.
11-1
Short Double
Link #CNE307
Outer Seesaw
Assembly
#CNE306
Control Ball
(1 on each side)
Long Adjustable
Link #CNE307
Swashplate
(inner race)
#CNE314
Upper Frame
Assembly
Main Shaft
#CNE313
Brass Washer
Bearing
#CNE313
#CNE213F
Motor
using the
Motor Mount Spacers
provided in CNE301. Align so that the
of the
Motor
meshes smoothly with the large
Gear.
CNE252 Lightning Brushless
Main Blade Grips
#CNE302
Control Ball
Tail Boom Brace
Bracket #CNE310
M2x5 Machine
Screw #CNE310 (2)
Rear Lower
Bracket
#CNE310
and
M3x18
Motor,
Short Double
Link #CNE307
Long Adjustable
Link #CNE307
Long Solid Link
#CNE307
(1 on each side)