Airflow PVM610 Panduan Pengoperasian dan Servis - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Servis untuk Alat Ukur Airflow PVM610. Airflow PVM610 16 halaman. Ventilation testing / micromanometer
Halaman Cetak- 1. Table of Contents
- 1. Chapter 1 Unpacking and Parts Identification
- 2. Chapter 2 Setting-Up
- 2. Irflow Pvm610
- 2. Installing the Batteries
- 3. Chapter 3 Operation
- 3. Keypad Functions
- 4. Chapter 4 Maintenance
- 4. Recalibration
- 4. Cases
- 4. Storage
- 5. Chapter 5 Troubleshooting
- 6. Appendix A Specifications
Chapter 3
Operation
Keypad Functions
ON/OFF Key
ft/min / m/s Key
in H
O / Pa / hPa /
2
kPa / mm HG Key
0 Key
Changing Units
Press to turn the Alnor AXD610/A
PVM610 on and off. During the power up
sequence the display will show the following:
Model Number, Serial Number, Software Revision
and Last Date Calibrated.
Pressing this key changes the display to read air
velocity, converted from.
Pressing this key changes the display to read
differential pressure.
Pressing the 0 key zeroes the pressure
measurement.
To change units, first put the desired measurement
(air velocity or temperature) on the display. Then
press and hold the left, unlabelled key for five
seconds. Finally, use the
select the units.
IRFLOW
and ENTER key to
5