Gantom ST168 Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sorotan Gantom ST168. Gantom ST168 15 halaman.

CONTROL SCREEN

o Address – This box shows the address that will be

assigned to the fixture if you hit the "Assign Address"

button

o Assign Address – Hitting this button will assign the

selected address to the fixture. The light fixture should

blink in response to having a new address assigned.

o Save button – this will allow you to save a settings

profile into the app. Use this if you need to configure

many fixtures to have the exact same settings. Please

note that this button DOES NOT save the current

profile or address to the fixture.

o Console Sliders – These sliders allow you to set

intensity levels for each channel. Only the CH1 slider

will work with the Storm Form DMX

o Store as Default – hitting this will save the current

color and brightness to be the default state for the

light when it turns on. If the light does not see DMX

signal when it is powered on, it will go to this state.

Storm Form and Storm Form DMX User Guide

Version 1.1 – 2/25/2021